Điểm truy cập không dây AP6522

Designed for small offices and retail locations, the AP 6522 can handle the burgeoning number of Wi-Fi-enabled devices and bandwidth-heavy applications connecting to your wireless network. The AP 6522 is a site-survivable wireless access point, which does not require a controller. With its WiNG 5 intelligence, the AP 6522 can also serve as a virtual controller and coordinate the operation of up to 24 neighboring access points. It connects to other access points in a mesh topology to enable the extension of wireless network coverage to areas where Ethernet cabling is cost prohibitive or otherwise impractical.

Thông Số Kỹ Thuật:


Simplify and lower the total cost of installation using standard Power-over-Ethernet (PoE). Radios can be configured for client access on 2.4Ghz and 5Ghz, or can be independently used with one radio for client access and the second radio for sensing.


Count on the AP 6522 to support Call Admission Control, for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11 a/b/g/n clients. Extend wireless network coverage in a cost-effective way to enable a wide array of applications.


Dynamically sense weak or failing signals, securely move mobile users to alternate APs, and boost signal power, to automatically fill RF holes and ensure uninterrupted mobile user access.


Dual Radio Access Points (300 Mbps per radio)



AP 6522 (INTERNAL ANTENNA): 0.85 lbs / .385 kg AP6522 (EXTERNAL ANTENNA): 1.75 lbs. / .793 kg


LED indicators

Dimensions (HxWxD)

AP 6522 (INTERNAL ANTENNA): 7.5W x 9.5L x 1.1H / 19.05cm W x 24.13cm L x 2.78cm W AP 6522 (EXTERNAL ANTENNA): 5.0W x 7.8L x 1.0H / 12.7cm W x 19.81cm L x 2.54cm H

Available mount configurations

Wall, Ceiling, Open Beam (with KT135628-01)

Radio specifications and networking

Data rates supported

802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps

Wireless medium

Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)


Auto-sensing 10/100/1000Base-T Ethernet

Maximum available transmit power

2.4GHz: 21dBm per chain, 5.0GHz: 20dBm per chain

Operating bands - FCC

2412 to 2472 MHz and 2484 MHz, 5180 to 5825 MHz

Network standards

802.11a, 802.11b, 802.11g, 802.11n

VLANS/WLANs supported

VLANs and WLANs are controller-dependent

Operating channels

Radio 1: 2.4GHz: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only Radio 2: 2.4GHz: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only; 5GHz: All channels from 5200 MHz to 5825 MHz Actual operating frequencies depend on national regulatory limits

Transmit power adjustment

1dB increment

Maximum transmit power settings

2400MHZ Band Single Antenna Transmit Power: +21 Dual Antenna Composite Transmit Power: +24 dBm 5200MHZ Band Single Antenna Transmit Power: +20 Dual Antenna Composite Transmit Power: +23 dBm

Antenna specifications

Antenna configurations

1x1, 1x2, 2x2

Internal Antenna Information

Radio 1: 2.4GHz band - 3.9dBi Radio 2: 2.4GHz band - 4.4dBi Radio 2: 5.0GHz band - 7.5dBi

User environment

Operating temperature

0° to 40°C / 32° to 104°F

Operating humidity

5 to 95% RH, non-condensing

Storage altitude

30, 000 ft @ 12°C

Storage temperature

-40° to 85°C / -40° to 185°F

Operating altitude

8, 000 ft @ 28°C

Electrostatic discharge

15kV air and 8kV contact @ 50% RH

Power specifications

Operating voltage

48Vdc (PoE in) / 12Vdc (Aux in)

DC power consumption

12W Max

Operating current

0.25A (PoE) / 1.0A (Aux)

Regulatory specifications

Electrical safety

External antenna: UL 60950, cUL, EU EN 60950, TUV, UL 2043

Radio approval

FCC (USA), Industry Canada, CE (Europe) and TELEC pending (Japan)