Điểm truy cập không dây AP7532

The AP 7532 802.11ac access point adds bandwidth and performance to your network -- a must for supporting high-density traffic from laptops, tablets, smartphones and other devices – while delivering advanced security options. Configure the AP 7532 to act as an in-line sensor for client location awareness and as a tool for security threat analysis, or dedicate a single unit to a security role full-time for greater power and performance. This is the type of flexibility network managers will appreciate when designing your secure network.


Thông Số Kỹ Thuật:

FAST WI-FI SPEEDS EVEN WHEN THE NETWORK IS LOADED

The AP 7532 features dual radio 802.11n and 802.11ac as well as three spatial streams combined with 256 QAM modulation support on both 2.4 GHz and 5 GHz radios. The AP 7532 is able to serve all devices and applications, such as voice and HD video, while delivering increased speed.

All of this speed is on the 5GHz band where Bluetooth-enabled devices or even microwave ovens can’t interfere, providing a high-speed, multiple-user, and multiple-device experience for your employees or guests.


DISCREET AESTHETICS OR FAR-REACHING CAPABILITIES, DEPENDING ON YOUR NEEDS

The AP 7532 with a small form factor is designed to blend in unobtrusively when installed on a ceiling. The unit’s external antenna variant can be outfitted with High Density Panel antennas designed to accommodate high ceilings or tight locations. This kind of versatility delivers flexibility when you need it most.


EASY MIGRATION TO 5TH GENERATION 802.11ac WLAN

The dual radio AP 7532 provides the simplest path to next generation wireless LAN. The 802.11ac radio readies you to support new 5 GHz mobile devices, while the 802.11n radio ensures support for all existing mobile devices — including 2.4 GHz clients. The radios work together to allow you to migrate to 802.11ac at your own pace — and without the high cost of "rip and replace."

ANTENNA SPECIFICATIONS

Connector type

Three RP SMAs (External only - AP-7532-67040-xx)

PHYSICAL CHARACTERISTICS

Housing

Plenum-rated housing (UL2043)

LEDs

2 top-mounted LEDs; activity indication

Weight

1.8 lbs / 0.82 kg

Dimensions (HxWxD)

1.6 in. H x 6.5 in. W x 7.1 in. L / 41 mm H x 165 mm W x 180 mm L

POWER SPECIFICATIONS

Integrated power over ethernet support

802.3af

Operating current

312 mA at 48 V

Operating voltage

48v

RADIO SPECIFICATIONS AND NETWORKING

Operating channels

2.4 GHz band: channel 1 through channel 13 5.2 GHz band: channel 36 through channel 165 * Channel availability depends on local regulatory restriction

QoS

WMM, WMM-UAPSD, 802.1p, Diffserv and TOS

Data rates supported

802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48 and 54 Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps 802.11n: MCS 0-23 up to 450 Mbps; Turbo mode (256 QAM) on 2.4 GHz band up to 600 Mbps 802.11ac: MCS 0-9 up to 1.3 Gbps

Security

Stateful Firewall, IP filtering, NAT, 802.1x, 802.11i, WPA2, WPA Triple-Methodology Rogue Detection: 24x7 dual-band WIPS sensing, on-board IDS and secure guest access (hotspot)

Frequency

2412 to 2484 MHz, 5180 to 5850 MHz

Layer 2 and Layer 3

Layer 3 routing, 802.1q, DynDNS, DHCP server/client, BOOTP client, PPPoE and LLDP

Wireless medium

Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM) and Spatial Multiplexing (MIMO)

Transmit power adjustment

1dB increment

REGULATORY SPECIFICATIONS

Electrical safety

UL 60950-1, EN 60950-1, IEC 60950-1, UL2043, cUL 60950-1, RoHS

Radio approval

FCC (USA), EU, TELEC

USER ENVIRONMENT

Electrostatic discharge

15kV air, 8kV contact (Internal AP-7532-67030-xx) 12kV air, 6kV contact (External AP-7532-67040-xx)

Operating humidity

85% RH non-condensing

Operating temperature

Internal antennas: 32° F to 104° F/0° C to 40° C External antennas: -4° F to 104° F/-20° C to 40° C

Storage temperature

-40° F to 158° F / -40° C to 70° C