AP6562 Wireless Access Point
Designed for extending wireless LAN coverage to outdoor areas, the AP 6562 cost-effectively supports the most demanding wireless applications and a large number of wireless devices. Ideal for distribution centers, hospitality, retail, and education campuses, the AP 6562 can handle the ever-increasing number of Wi-Fi-enabled devices and bandwidth-heavy applications connecting to your wireless network.
Thông Số Kỹ Thuật:
FULL 802.11N PERFORMANCE WITH STANDARD 802.3AT AND MESH NETWORKINGSimplify and reduce the total cost of installation using standard Power-over-Ethernet (PoE). Patented Mesh Networking – MeshConnex™– allows wireless extension of existing wired or wireless networks in remote or outdoor locations, eliminates running expensive cables to every AP outdoors. MOBILITY SUPPORTS FAST, SECURE ROAMINGThis unique, multi-purpose device can execute and enforce the IDS/IPS security policies configured in the Zebra wireless switch, and can also be utilized as a 24x7 dedicated sensor for wireless IPS with AirDefense services. OUTDOOR IP67-RATED, POLYMERIC CORROSION RESISTANT ENCLOSUREDesigned to withstand wind, rain, and extreme temperatures, this ruggedized access point has proven itself time and time again. PHYSICAL CHARACTERISTICSOutdoor access pointsYes Weight2.9 lbs Dimensions (HxWxD)9.1” x 9.8” x 2.6” Available mount configurationsAdaptable mounting kit for wall and pole deployments (KT-147407-01). With optional extension arm accessory (KT-150173-01). User environmentShock and vibrationOperational shock: IEC60721-3-4, Class 4M3, MIL STD 810F Operational vibration: IEC60721-3-4, Class 4M3 Storage altitude30, 000 ft Operating humidity5 to 95% RH, non-condensing Operating temperature-30 to +60°C Electrostatic dischargeEN61000-4-2. Air +/-15kV, Contact +/-8kV Operating altitude8, 000 ft Storage temperature-40 to 85°C Power specificationsIntegrated power over ethernet support802.3at draft power injector Operating voltage36-57 VDC Radio specifications and networkingOperating bands - FCC2412 to 2472 MHz and 2484 MHz, 5180 to 5825 MHz Maximum available transmit power2.4GHz: 21dBm per chain, 5.0GHz: 20dBm per chain UplinkAuto-sensing 10/100/1000Base-T Ethernet Wireless mediumDirect Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing(OFDM), and Spatial Multiplexing (MIMO) Data rates supported802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps, 802.11n: MCS 0-15 up to 300Mbps Transmit power adjustment1dB increment Operating channelsRadio 1: 2.4GHz: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only Radio 2: 2.4GHz: Chan 1-13 (2412-2472 MHz), Chan 14 (2484 MHz) Japan only 5GHz:All channels from 5200 MHz to 5825 MHz Actual operating frequenciesdepend on national regulatory limits VLANs/WLANs supportedVLANs and WLANs are controller-dependent Network standards802.11a, 802.11b, 802.11g, 802.11n Antenna specificationsAntenna configurations1x1, 1x2, 2x2 |