Điểm truy cập không dây AP7502

This compact access point is 40 percent smaller than its nearest competitor, but still delivers big performance. Just 3.5” x 3.7” (90mm x 95mm), the AP 7502 can fit onto any Cat5e wall plate via the global mounting bracket, allowing you to leverage your existing infrastructure to deliver high-speed wireless LAN.


Thông Số Kỹ Thuật:

LOW-POWER DESIGN BRINGS HIGH SPEED INTERNET AND
COST SAVINGS

The AP 7502 is an inconspicuous and tamper-proof access point which hides in plain sight, ideal for hotel rooms, classrooms, apartments, or dorm rooms. With 802.11n and 802.11ac radios, five internal antennas, and a host of Zebra-exclusive features, this little access point can deliver wireless LAN connectivity to each device in the room. Its understated, secure design is also energy efficient to provide superior wireless access at a lower cost.


SNAP-ON ACCESS = RAPID INSTALLATION

The AP 7502 offers easy snap-on installation to existing wall cabling. Configuration is automatic on installation and the access point supports remote management. A mounting bracket makes installation even easier and ensures the access point’s low-profile impact on room décor.


FUTURE-READY FOR LONGEVITY

Once installed, expect the AP 7502 to endure, delivering high-speed wireless access and next generation technology. Locationing support, such as Bluetooth® SMART, ensures you can deliver an excellent user experience now and in the future.

PHYSICAL CHARACTERISTICS

LEDs

2 single color status LEDs

Dimensions (HxWxD)

1.35 in. H x 3.7 in. W x 3.5 in. L / 35 mm H 95 mm W x 90 mm L; Extends into wall cavity .25 in. / 7mm

POWER SPECIFICATIONS

Operating voltage

Local 12v DC power

Integrated power over ethernet support

802.3at, 802.3af

RADIO SPECIFICATIONS AND NETWORKING

Operating channels

2.4 GHz band: 2400 - 2483.5 MHz 5.2 GHz band: 5150 - 5250 MHz, 5725 - 5850 MHz

Wireless medium

Direct Sequence Spread Spectrum (DSSS), Orthogonal Frequency Division Multiplexing (OFDM), Modulation and Coding Scheme, (MCS), High Throughput (HT)

Transmit power adjustment

6dBm to 15dBm per transmit chain. 1dB increments. (Actual transmit power dependent on national limits)

Frequency

2412 – 2472MHz; 5150 – 5850MHz. Actual frequency dependent on national and regulatory limits

Layer 2 and Layer 3

802.1Q, 802.1D, DHCP Server/client, BootP, PPPoE, LLDP, GRE and IPSec

Network standards

Regulatory Specifications: EN300 328, EN 301 893; CE, IC, FCC

Security

Stateful L2/L3 firewall, IP filtering, NAT, 802.1x, 802.11i, WPA2, Dedicated fulltime WIPS sensor mode, secure guest access captive portal

Data rates supported

802.11b: 1, 2, 5.5 and 11 802.11g/a: 6, 9, 12, 18, 24, 36, 48 and and 54 Mbps 802.11n: MCS 0-15 up to 300 Mbps 802.11ac: MCS 0-8 up to 867 Mbps

QoS

WMM, 802.1P, DSCP. Applied per radio, WLAN and user

REGULATORY SPECIFICATIONS

EMC

EN 55022, FCC Part 15 Class B, ICES 003 Class B, EU RoHS Directive 2011/65/EU (EN50581: 2012 Standard), EN 55024: 2003, EN 55024: 2010 + A2, EN 55024: 2010 + A1

Electrical safety

UL EU EN 60950-1 2nd Ed., ANZ RCM

Environmental

FCC 15.247, 15.407

USER ENVIRONMENT

Operating humidity

5% to 90% non-condensing

Operating temperature

32° F to 104° F/0° C to 40° C